The Department of Marine Engineering

Politeknik Ungku Omar, 

Jalan Raja Musa Mahadi, 

31400 Ipoh, Perak.

05 – 545 7622 | 05 – 545 7260 

05 – 547 1162

Politeknik Ungku Omar

  • The depart has been conducting the Diploma in Marine Engineering programme since 1972.
  • The need to train and prepare Malaysians for the exciting maritime industry was addressed with the establishment of Marine Engineering Department at Politeknik Ungku Omar.
  • This programme was jointly set up by the Ministry of Education Malaysia and the Japan International Corporation Agency (JICA) under the Colombo Plan.
  • Supports Malaysia’s maritime industry & Malaysia Shipping Master Plan (MSMP) objectives.
  • In the initial stage of setting up this programme, 5 Japanese experts from JICA were assigned to establish the curriculum development and workshops with the assistance of local lecturers and officers from the Ministry of Education.
  • The Bachelor of Marine Engineering Technology with Honours was introduced in 2024 as part of Politeknik Ungku Omar’s ongoing efforts to expand its academic pathways in maritime education
  • As of 2026, the Marine Engineering Department has produced around 5000 marine engineering graduates.
  • The Marine Engineering Department has produced Malaysia’s largest marine engineering graduates.

Tab Content

Tab Content

Tab Content

Programme Offered

1) Bachelor of Marine Engineering Technology with Honors (BMT)

Synopsis

The Bachelor of Marine Engineering Technology with Honours (BMT) is designed to cover the current broad disciplines and practices of marine engineering with additional specialization subjects in marine engineering. It also emphasizes the operation and maintenance of ships’ main propulsion plants, marine power generation, shipbuilding and naval architecture. The programme also includes basic knowledge of mechanical and electrical engineering, entrepreneurship and sustainable environment. This programme offers for eight (8) semesters which includes Work Based Learning (WBL) or sea training for two (2) semesters in the field. The education and training programmes conducted are designed not only to meet but to exceed the minimum levels of skills and competencies set out in the International Convention on Standards of Training, Certification and Watchkeeping of Seafarers (STCW 1978 – Manila Amendment 2010) Course Module 7.04 edition 2014 and other relevant national and international guidelines. This course is developed from four functions at the management level base on International Maritime Organisation (IMO) Model Course 7.02. On successful completion of the course and the requisite watchkeeping experience, officers will be prepared for taking full responsibility for the safety of the ship, its passengers, crew and cargo. They will be aware of their obligations under international agreements and conventions concerning safety and the protection of the marine environment and will be prepared for taking the practical measures necessary to meet those obligations. Students who completed this programme will be exempted from Part A of STCW. Certificate of Competency (CoC) Chief and Second Engineer Officer ≥ 3000 kW Unlimited Trade Voyages by the Malaysia Marine Department (MMD), Ministry of Transport (MoT) Malaysia and compulsory to undergo several mandatory modular courses to qualify students for CoC oral examination organized by the MMD. This modular course covers various skill elements such as workplace safety, incident handling and management as well as protecting and preserving the environment.

Career Prospects

This programme provides the knowledge and skills in Marine Engineering field that can be applied to a broad range of careers in Marine Engineering. Graduates in Bachelor in Marine Engineering Technology with relevant Certificate of Competency (CoC) can work as:  

  • Technical Superintendent
  • Marine officer in Malaysia Marine Department
  • Engineer in government sector
  • Lecturer in Maritime Institution
  • Marine Engineer in Shipyard, Heavy Industry and Power Plants Offshore

Duration:

8 semester / 4 years

Courses:

Semester 1

    • Mathematics for Engineering Technology
    • Maritime Mathematics
    • Maritime English
    • Marine Workshop Practice 1
    • Engineering Science
  • Engineering Drawing
  • Electrical Technology 1

Semester 2

    • Marine Workshop Practice 2 
    • Material Technology 
    • Machining & Metal Fabrication 
    • Applied Electronic
    • Marine Auxiliary Machinery
  • Thermodynamics
  • Aspirasi Negara Bangsa

Semester 3

    • Naval Architecture
    • Marine Engineering Practice
    • Electrical Technology 2
    • Marine Workshop Practice 3
    • Control Engineering
    • Mechanic of Science
  • Kursus Integriti & Anti Rasuah
  • Khidmat Masyarakat

Semester 4

    • Internal Combustion Engine
    • Maritime Legislation
    • Marine Auxiliary Machinery & System
  • Ship Construction
  • Presentation Skills

Semester 5

  • Electrical & Control Workshop Practice
  • Steam Engineering
  • International Maritime Legislation
  • Marine Diesel Engine
  • Marine Electrotechnology
  • English for Engineering & Technology

Semester 6

  • Marine Workshop Practice 4
  • Marine Gas & Steam Turbine
  • Marine Automation & Control
  • English for Academic Writing
  • Falsafah & Cabaran Semasa
  • Keusahawanan

Semester 7 (WBL)*

  • Project 1
  • Health, Safety, Security & Environment
  • Project Management

Semester 8 (WBL)*

    • Project 2
    • Marine Operation
  • Maintenance & Troubleshooting

*WBL – Work Based Learning

Syarat Am

  1. Warganegara Malaysia ;DAN 
  2. Lulus SPM atau peperiksaan yang diiktiraf setara dengannya oleh Kerajaan Malaysia ;DAN
  3. Mendapat kepujian dalam Bahasa Melayu/Malaysia di peringkat SPM ;DAN
  4. Memiliki kelulusan Diploma atau kelulusan lain yang diiktiraf setaraf oleh Kerajaan Malaysia

Syarat Khas Program

  1. Lulus pengajian peringkat Diploma/ Diploma Lanjutan Politeknik yang berkaitan sekurang-kurangnya HPNM 2.00 ;ATAU
  2. Lulus pengajian peringkat Diploma Teknologi yang berkaitan daripada Kolej Komuniti dengan mendapat sekurang-kurangnya HPNM 2.00 ;ATAU
  3. Lulus pengajian peringkat Diploma dalam bidang Kejuruteraan atau Teknologi Kejuruteraan atau Teknologi yang berkaitan daripada Institusi Pendidikan Tinggi Awam (IPTA) dengan mendapat sekurang-kurangnya HPNM 2.00 ;ATAU
  4. Lulus pengajian peringkat Diploma dalam bidang Kejuruteraan atau Teknologi Kejuruteraan atau Teknologi yang berkaitan daripada kelulusan yang diiktiraf kerajaan Malaysia dengan mendapat sekurang-kurangnya HPNM 2.00 ;ATAU
  5. Lulus pengajian peringkat Asasi Teknologi Kejuruteraan daripada Politeknik dengan mendapat sekurang-kurangnya HPNM 2.00 ;ATAU
  6. Lulus pengajian peringkat Matrikulasi/ Asasi Institusi Pendidikan Tinggi Awam (IPTA) dengan mendapat sekurang-kurangnya HPNM 2.00 ;ATAU
  7. Mendapat sijil APEL (Accreditation of Prior Experiential Learning) daripada MQA untuk kemasukan ke Ijazah Sarjana Muda (Tahap 6) ;DAN
  8. Calon perlu memperoleh kelulusan Band 4.0 dalam Malaysian University English Test (MUET) dalam tempoh pengajian sebagai syarat bergraduat ;DAN
  9. Calon TIDAK mempunyai buta warna dan ketidakupayaan fizikal / anggota sehingga menyukarkan kerja-kerja amali
  10. Lulus temuduga

Program Educational Objectives (PEO)

  • PEO 1: Proficient with industry-relevant knowledge and skills in marine engineering field.
  • PEO 2: Engaging on lifelong and continuous learning to enhance knowledge and skills.
  • PEO 3: Acquire entrepreneurial skills and mind set in the real working environment.
  • PEO 4: Established strong linkage with society and players in the industry.

Program Learning Outcomes (PLO)

  • PLO 1: Apply knowledge of mathematics, science, marine engineering technology to defined and applied engineering procedures, processes, systems or methodologies. (SK1-SK4)
  • PLO 2: Identify, formulate, research literature and analyze broadly defined engineering problems reaching substantiated conclusions using analytical tools appropriate to marine engineering discipline. (SK1-SK4)​
  • PLO 3: Design solutions for broadly defined engineering problems and contribute to the design of systems, components or processes to meet specified needs with appropriate consideration for public health and safety, cultural, societal, and environmental considerations. (SK5)​
  • PLO 4: Conduct investigations of broadly defined problems; locate, search and select relevant data from codes, data bases and literature, design and conduct experiments to provide valid conclusions. (SK8)
  • PLO 5: Select and apply appropriate techniques, resources, and modern engineering and IT tools, including prediction and modelling, to broadly defined engineering activities, with an understanding of the limitations. (SK2 and SK6)​
  • PLO 6: Demonstrate understanding of the societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to engineering technology practice. (SK1, SK5 and SK7)​
  • PLO 7: Understand and commit to professional ethics and responsibilities and norms of engineering technology practice. (SK9)​
  • PLO 8: Function effectively as an individual, and as a member or leader in diverse technical teams. (SK9)​
  • PLO 9: Communicate effectively on broadly defined engineering activities with the engineering community and with society at large, by being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions.​
  • PLO 10: Demonstrate knowledge and understanding of engineering management principles and apply these to one’s own work, as a member and leader in a team and to manage projects in multidisciplinary environments.
  • PLO 11: Recognize the need for and have the ability to engage in independent and life-long learning in specialist technologies. (SK8)​

2) Diploma in Marine Engineering (DKP)

SYNOPSIS

The Diploma in Marine Engineering Program includes elements of knowledge and engineering practices related to the field of marine engineering. It emphasizes the operation and maintenance of the ship’s operational systems and auxiliary equipment, marine power generation, shipbuilding, and ship architecture. It also includes knowledge of basic engineering techniques. This program runs for seven semesters including industrial training (sea training) for 12 months. Education and training programs are conducted to meet the minimum level of skills and competence set in the International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW) 2010 as well as related national and international standards and guidelines. Graduates who complete this program will be exempted from sitting the Competency Certificate Examination Part A for Second Engineer Officer and Chief Engineer Officer ≥ 3000 kW without limit by the Marine Department, Ministry of Transport (MOT) Malaysia.

Career Prospect

Graduates of a Diploma in Marine Engineering with a certificate of competency are eligible to serve as:

• Marine Engineer
• Superintendent
• Marine Officer
• Assistant engineer
• Maritime Institution Lecturer
• Assistant Engineer in Shipyard, Heavy Industry, and Power Plant

SPM graduates

1. Malaysian
2. Have SPM or equivalent
3. Pass History (SPM 2013 and above)
4. Obtained FIVE (5) honours in the following subjects:
1. Malay
2. English
3. Mathematics
4. Additional Mathematics OR Physics OR Science
5. ONE (1) other subjects that has not been taken into account
5. Candidates do not have visual (blindness, colour blindness), hearing, speech, physical, or learning disabilities that make practical work difficult
6. Pass the interview, written test, and colour blindness test
7. Male Candidates Only

Graduates other than SPM

* If interested in applying to this Program, please contact the Student Intake Unit, section Student Intake and Development Division.

APEL graduate

1. Malaysian
2. Obtain an APEL (Accreditation of Prior Experiential Learning) certificate from MQA for admission to the diploma (Level 4)
3. Have experience working in a related field

Tab Content

Tab Content

Tab Content